Environmental Chambers and Space Simulation Systems

Request a Quote
P700 Obsolete Bulletin PDF

P700 Obsolete Bulletin PDF

Bench Top Salt Spray and Fog Chamber

P700 Obsolete Bulletin PDF

Bemco's Standard P700 Salt Spray and Fog chamber is designed to fill the needs of laboratories that require accurately controlled salt spray and fog tests on small components and assemblies. This unit meets all standard military, commercial, and ASTM salt fog corrosion and humidity corrosion tests. The P700 is currently in redesign to incorporate a clear - see through top with the same advanced features of the previous fiberglass system. This chamber has a workspace of 12-inches wide by 12-inches high by 18-inches deep.

The temperature range is ambient to 125 F, + or - 2 F. The bubble tower size is one gallon and the salt solution size is two gallons. Salt solution consumption is 0.3 gallons per hour. It requires a single source of 115 VAC - 1 Phase - 60 Hertz power and uses 10 Amperes. It also needs an air supply of at least 15 Psig and a free flowing drain. An option is offered to extend operating time to 120 hours and to meet ASTM-B117.

Additional options are described in the bulletin.

This system will be available for sale starting in June of 2007. The previous literature describing the older P700, no longer available, may be downloaded by clicking on the image.



We also make custom salt spray and salt fog chambers, including walk-in models, to your requirements.  If you have any questions, need assistance in preparing a specification, or have a technical problem you want help with, we are ready.  Our quotations and advice are free.

Back to the Top Home

Bemco Inc, 2255 Union Place, Simi Valley, California 93065, Telephone (805) 583-4970, Fax (805) 583-5033

"Conrad Missimer" and "PAO Chiller" found at http://www.paochiller.com are Divisions of Bemco Inc.
Kardburn, Koldburn, and Bemcoil are Trademarks of Bemco Inc. Bemco Web Site, © 2007 Bemco Inc.